Alyco

Ficha técnica

1/4 DR. DUAL RATCHET 72 TEETH

Code
192133
EAN-13
8421504921332
Ratchet size fit Length
1/4" 110 mm
  • Ratchet for tightening with 1/4" socket drive. The short ergonomic handle allows tightening in tight spaces
  • Very accurate tightening thanks to the 72-tooth mechanism, which allows tightening with a pitch of 5 degrees, extremely exact
  • Ratchet made of Chrome-Vanadium Steel, top-quality and wear resistant. Very precise tightening, without damaging the socket or the bit
  • Manufactured from heat-treated steel for increased strength and tightening capacity. High dimension accuracy ensures that the socket and nut don’t wear during tightening and extends the tool’s service life. Chrome surface treatment for durability and to prevent oxidation
  • Allows use with 1/4" square sockets and T-handle. Thanks to the screwdriver bit holder, it can be used with any type of bit (Slotted, PH, PZ, Torx, etc.). It can also be used with extension bars, universal joints, adaptors, etc. for a wide range of functions.

Go to main product

Data sheet

  • Ratchet for tightening with 1/4" socket drive. The short ergonomic handle allows tightening in tight spaces
  • Very accurate tightening thanks to the 72-tooth mechanism, which allows tightening with a pitch of 5 degrees, extremely exact
  • Ratchet made of Chrome-Vanadium Steel, top-quality and wear resistant. Very precise tightening, without damaging the socket or the bit
  • Manufactured from heat-treated steel for increased strength and tightening capacity. High dimension accuracy ensures that the socket and nut don’t wear during tightening and extends the tool’s service life. Chrome surface treatment for durability and to prevent oxidation
  • Allows use with 1/4" square sockets and T-handle. Thanks to the screwdriver bit holder, it can be used with any type of bit (Slotted, PH, PZ, Torx, etc.). It can also be used with extension bars, universal joints, adaptors, etc. for a wide range of functions.

    • Overview

    Dual ratchet for tightening with 1/4" male square drive and 1/4" bit socket. Short series 112 mm
    This ratchet is made of Chrome-Vanadium Steel, which gives it greater strength, tightening capacity and service life.
    The metal part of the ratchet is heat-treated during the manufacturing process, which gives it a higher clamping capacity, prevents cracks and extends its service life.
    At the end of the manufacturing process, they’re surface treated with chrome plating, which prevents corrosion and extends the service life.
    Ratchet for tightening with 1/4" socket drive. And for 1/4" socket for screwdriver bits
    The ratchet has a 72-tooth mechanism, so that each turning pitch is 5 degrees in circumference, for effective and precise tightening.
    It has a lever for changing the rotation direction, which makes it very practical in tight spots with reduced turning angle or confined spaces.
    Adding to this versatility is the 1/4" screwdriver bit holder, allowing hexagonal nut tightening on one side and screwdriver tightening for with all types of screws, depending on the bit.
    The ergonomic bi-material handle allows maximum force to be exerted without hand fatigue, even during intensive repetitive use.
    The ratchet performs accurate tightening with high force transmission, without wearing the socket, which is permanently attached to the ratchet socket drive.
    The spring-loaded ball of the square drive fits into a recess in the socket to prevent accidental dropping and to keep the other hand free. By pressing the quick-release button, the ball retracts and the socket can be removed easily.
    The ratchet can be used with an extension bar, flexible extension bar and universal joint.

    Durable, corrosion-resistant, non-slip handle, suitable for long tasks.
    Widely used for tightening or untightening hex head bolts and normal nuts and screws of different kinds including slotted, PH, PZ, etc.
    Ideal for tightening nuts in industrial tasks, industrial maintenance and DIY use.

    Technical characteristics

    Type of tool:
    Dual ratchet 1/4" square drive on one side and adaptor for 1/4" hex socket bits on the other side
    Use:
    Used for fastening or unfastening screws by attaching sockets or accessories (extension bars, universal joints, adaptors...) with 1/4" square female conductor.
    Special features:
    Short and very light ratchet. Its main advantage is its small size and ease of transport. Due to its small size it is very suitable for reaching places that cannot be reached with standard length ratchet spanners. What’s more, direct coupling functionality for 1/4" hexagonal shank screwdriver bits.
    Number of teeth / turning angle:
    72 teeth / 5º turn per tooth
    Head size:
    Width 26 mm / height 25 mm
    Head material:
    Closed end. Internal mechanism of Chrome-Vanadium Steel
    Maximum tightening force:
    82 N.m / 8.36 Kg.m (32 % higher than DIN 62 N.m)
    Reversible:
    Yes. Easy-to-use flip reverse switch.
    Handle type:
    Hidden, as the handle reaches the head area.
    Handle grip shape:
    Cylindrical and ergonomic shape. Large diameter of 28 mm.
    Handle grip material:
    Bi-material handle grip. Non-slip rubber handle
    Hole for hanging:
    Yes. Φ 10 mm hole at the end of the handle.

    Finishes

    Color:
    Blue/grey handle and grey/black body
    Material:
    Chrome vanadium steel body and bi-material handle
    Finish:
    Chrome-plated body

    Certifications

    Certification:
    DIN 3122

    Product dimensions

    Weight (kg) Length (cm) Width (cm) Height (cm)
    0.1020 11.2 2.60 2.50

    Documents

    • Certification 1